Дома > Products > HDPE Pipe Fittings

{клучен збор} Производители

Штоs HDPE Pipe Fittings?

За поврзување на системите за цевки HDPE се користат приклучоци за цевки HDPE, исто така наречени додатоци за полиетиленски цевки или поли додатоци.


Редовно, фитинзите за цевки HDPE се достапни најчестоконфигурации на спојници, маици, редуктори, лакти, прирабници за никулци и седла, итн.


ШтоДали е најголемата разлика помеѓу фитинзите за цевки HDPE што се направени од материјал PE80 и материјал PE100?

The HDPE pipe fittings made by “PE80 material”, are also called PE80 fittings, while “PE100 fittings” means the HDPE pipe fittings made by PE100 material.


PE80 фитинзи и PE100 фитинзи се најчестите фитинзи за цевки HDPE на пазарите.


The major difference between the PE80 fittings & PE100 fittings are density, MFR(melt-flow rate), viscous stress & quasi-static stress. The PE100 material has поголем модул на стврднување на затегнување од материјалот PE80, што ги прави фитинзите за цевки HDPE изработени од материјал PE100 можат да вршат подобар слатко-стрес и квази-статички напон, што им овозможува на приклучоците PE100 да имаат потенки wallидови за истите оценки на притисок.

 

For examples: for the HDPE pipe fittings with same diameter & same designed pressure rating, like: DN200-PN10 bars HDPE pipe, the wall thickness will be 11.9mm for PE100 fittings, while for PE80 fittings, the wall thickness will be 14.7mm.

 

Бидејќи материјалот PE100 должи поголем модул на стврднување на напрегање и понизок MFR, треба да се побара поголем притисок на обликување и поголема температура на вбризгување при производство на фитинзи за цевки HDPE изработени од материјал PE100.

 

Што kind of HDPE pipe fittings that SUNPLAST can provide?

SUNPLAST е интегриран снабдувач на системи за цевки HDPE,и можеме да ги обезбедиме фитинзите за цевки HDPE со разни ставки и спецификации.


Приклучоците за цевки HDPE, направени од одличен квалитет на материјал, се идеален избор за приклучување на цевката HDPE што ги прави SUNPLAST.


SUNPLAST HDPE pipe fittings can be provided in various ranges, consisting: PP compression fittings, HDPE butt fusion fittings, HDPE electrofusion fittings.


Фитинзи за компресија на ПП

Фитинзи за компресија на ПП

Приклучоците за компресија на ПП се врвен избор за цевки со мал дијаметар HDPE до 110 mm, особено за водовод и системи за наводнување.


SUNPLAST може да обезбеди ПП компресивни арматури од dn20-110mm со дизајнирани рејтинг притисок PN16 шипки. 

Име на производот

Спецификации се достапни

Оценки на притисок

конфигурации

Фитинзи за компресија на ПП

20/25/32/40/50/63 /

75/90/110mm

PN16

Coupler, reducer, Tee, elbow 90 degree, 

reducing tee, female/male thread coupler, 

лак женски / машки конец, женска / машка нишка

 tee, end cap, flanges, clamp saddle

Download our price list Фитинзи за компресија SUNPLAST PP

Easy to assemble & disassemble, labor cost saving & reliable use are the major performances of PP compression fittings. No welding, no special tools need & fast installation allow the PP compression fittings be widely used for water plumbing & irrigation systems for agriculture and Gardening.

PP compression fittings Specification

The PP compression fittings are the most frequently used unions. Its components are a plastic accessory (5) with the following elements in each side: one nut to close the system (2), one o-ring (4), one washer or insert (3) and one split ring or clearing (1). This last element, when the pipe is inserted and the nut is tight, makes a pressure on the pipe fixing it. The o-ring provides the perfect sealing of the union.


The PP compression fittings are available in various конфигурации, like couplers, tees, elbows, reducers, reducing tees, female thread or male thread couplers, female thread or male thread tees, female thread or male thread elbows, clamp saddles, tapping saddles.,etc.


 Фитинзи за фузија на задник HDPE

Фитинзи за фузија на задник HDPE

Фитинзите за фузија на задник HDPE станаа најчестите и најсигурни фитинзи за поврзување на цевките HDPE.


Фитинзите за фузија на задник HDPE овозможуваат усвојување a thermofusion process, by using HDPE pipe welding machine to fusion both the ends of HDPE pipe/HDPE pipe fittings simultaneously, then  two end surfaces are then brought together under controlled pressure for a specific cooling time and a homogeneous fusion joint is formed.


SUNPLAST HDPE butt fusion fittings can be provided in a diameter dn63mm to dn1200mm. The diameter DN63-800mm can be injection moulded in SDR17 & SDR11, while DN900-1200mm can be provided in FABRICATED TYPE only.

Име на производот

Спецификации се достапни

Оценки на притисок

конфигурации

Фитинзи за фузија на задник HDPE

(Обликуван тип)

63/75/90/110/125/140/160/180/

200/225/250/280/315/355/400 /

450/500/560/630/710/800

SDR17-PN10

SDR11-PN16

Tee, elbow 90 degree, elbow 45 degree,reducing tee, reducer, end cap, stub flanges

Фитинзи за фузија на задник HDPE

(Fabricated Type)

900/1000/1200

SDR11 / SDR13,6 / SDR17 /

SDR21/SDR26

Tee, elbow 90 degree, elbow 45 degree,reducing tee, reducer, end cap, stub flanges

Download the price list of Фитинзи за фузија со HDPE


Приклучоците за фузија на задник HDPE направени од материјал PE100 можат да понудат притисок на PN16 шипки за SDR11 & PN10 шипки за SDR17, додека PE80 приклучоците се PN12.5 шипки за SDR11 & PN8 шипки за SDR17.


SUNPLAST HDPE фитинзи за фузија на задник може да се понудат во разни артикли на редуктор, лакти, маици, прирабници ... итн.

 

HDPE Electrofusion fittings

Фитинзи за електрофузија на HDPE

Фитинзите за електрофузија на HDPE се посигурно и едноставно решение за поврзување на цевки со HDPE.


Like HDPE butt fusion fittings, HDPE electrofusion fittings also adopt a thermofusion process to joint to the HDPE pipe, by using HDPE pipe electrofusion machine, the electric power go through the brass wire that is coiled inside the surface of the both of ends of fittings, melting the outer surface of HDPE pipe & inside surface of the HDPE electrofusion fittings.


SUNPLAST може да понуди фитинзи за електрофузија HDPE од dn20mm до dn630mm со решетки за притисок SDR11-PN16 прачки.

Име на производот

Спецификации се достапни

Оценки на притисок

конфигурации

Фитинзи за електрофузија HDPE

20/25/32/40/50/63 /75/90/110/125/

140/160/180/200/225/250/280/315/

355/400/450/500/560/630

SDR11-PN16

ТЕ, лакт 90 степени, лакт 45 степени, редуктор на маици, редуктор, завршно капаче, прирабници за никулци, седла

Download the price list of Монтажи за електроенергија со HDPE


Кои стандарди се направени приклучоци за цевки SUNPLAST HDPE?

Фитинзи за цевки SUNPLAST HDPE, кои се одлични перформанси, можат целосно да ги исполнат меѓународните стандарди:

HDPE butt fusion fittings:ISO4427-3, ENI2201-3, AS4129

HDPE electrofusion fittings: ISO4427-3, ENI2201-3, AS4129

PP compression fittings: ISO17885

 

How does SUNPLAST to assure the quality of the HDPE pipe fittings? Што certificate can SUNPLAST provide for HDPE pipe fittings?

SUNPLAST ги вреднува „квалитетот на производот“ како живот на компанијата.


За да гарантираме најдобар квалитет на приклучоците за цевки HDPE што им се доставуваат на нашите клиенти, ние извршивме строг систем за квалитет заснован на стандардот ISO 9001, кој минува низ целиот процес на производство.


Firstly, we only use the best quality HDPE material from famous suppliers in worldwide, like Borealis, Sinopec, Sabic.,etc, and the materials are approved by PE100+ association (see: www.pe100plus.com). The material with superior quality is the first step to assure the top quality of all HDPE pipe fittings.


Secondly, during the production process, all dimensional inspection & surface inspection (as well as resistivity test for HDPE electrofusion fittings) shall be made by our professional workers, and the testing will be made for each piece of HDPE pipe fittings.


Конечно, финалните производи за завршна обработка ќе бидат тестирани во нашата лабораторија. Вклучено е и основното тестирање за фитинзи за цевки HDPE:

(1) Density; (2) Melt flow rate; (3) Longitudinal reversion; (4) Tensile strength; (5) Elongation at break; (6) Thermal stability; (7) Internal hydrostatic pressure test.


We assure to our customers, for each HDPE pipe fittings, they have been well tested before shipment.


Фитинзи за цевки SUNPLAST HDPE се одобрени од CE сертификат и тест известувачи издадени од кредибилни меѓународни тест центри.

 

ШтоДали е гарантното време во квалитетот на фитинзи за цевки HDPE од SUNPLAST?

Theoretically, the HDPE pipe fittings, which are made of virgin material, can be serviced for 50 years for normal use.


Фитинзите на цевките SUNPLAST HDPE се произведени од супериорен квалитет на материјалот и сите може да се гарантираат 15 години за нормална употреба.


Фитинзи за фузија на задник HDPE & фитинзи за електрофузија на HDPE, кој е подобар?

Фитинзи за фузија на задник HDPE и фитинзи за електрофузија на HDPE, и двете се најчесто користените фитинзи за цевки од HDPE.


The below is a comparison table between HDPE butt fusion fittings & HDPE electrofusion fittings:

Characteristic

Comparison Between HDPE butt fusion fittings & HDPE electrofusion fittings

Material Costs

The HDPE butt fusion fittings are regular much cheaper prices than HDPE electrofusion fittings. No like electrofusion, the HDPE pipes can be connected by a butt fusion methods, no need special coupler fittings , so less fittings will be requested, and much lower on material costs.

Трошоци за инсталација

Приклучоците за електрофузија на HDPE можат да се заваруваат на многу поедноставен начин, што може да се користи за одредени околности каде фузијата на задникот не е практична, како на пример, каде што треба да се додадат вентили, лакти и маици. Машината за електрофузија на цевки HDPE ќе биде многу пониска по цени. Значи, фитинзите за електрофузија на HDPE ќе имаат помалку трошоци за инсталација отколку фитинзи за фузија на задник HDPE

Reliability of Jointing

HDPE electrofusion fittings has a more reliable jointing than HDPE butt fusion fittings. The HDPE electrofusion fittings can weld in second times when a leak happens.


It is difficult to distinguish which one is better, because both of them reputes excellent performances. The HDPE electrofusion fittings can save installation costs and provider a more reliable jointing while HDPE butt fusion fittings are much lower on material costs.


In addition, for the HDPE pipe with a diameter higher to 200mm, the HDPE butt fusion fittings are a more efficient and economical option.


Shall we use the HDPE pipe fittings in SDR17-PN10 to connect our HDPE pipe in SDR13.6-PN12.5?

No, to guarantee the stability of the pipeline, the HDPE pipe fittings with higher pressure rating or at least same pressure rating as pipeline shall be adopted.


For examples: the HDPE pipe is SDR17-PN10, then the HDPE pipe fittings SDR17-PN10 or higher pressure SDR11-PN16 shall be requested.


Дали ќе ги користиме фитинзите за цевки HDPE изработени во материјал PE100 за заварување на нашите цевки за HDPE изработени во PE80?

Да, ова е достапно за работа. Топлинската фузија може да се изврши помеѓу различна генерација на одделение на материјал.


But to assure the best welding, please try best to use the same generation of HDPE pipe fittings to weld the HDPE pipe.


Што technology do HDPE pipe fittings be made? Is it same to HDPE pipe manufacturing?

The HDPE pipe fittings are made by injection moulded technology. The one-time injection moulded with out any jointing makes the HDPE pipe fittings the most reliable solution for HDPE piping systems.


HDPE цевката е направена со калапи за истиснување, што е различно од фитинзите за цевки за HDPE.


Може ли сите фитинзи за цевки HDPE да се обезбедат на лагер?

To satisfy our customers’ prompt delivery request, SUNPLAST stacks large inventory of HDPE pipe fittings.


Most of HDPE pipe fittings with regular sizes & items are all available in stock, like 63/75/90/110/160/200/250/315/400/450..etc


ШтоДали се методите за пакување на цевководот SUNPLAST HDPE?

За фитинзи за цевки со дијаметар dn20-315mm HDPE, тие редовно се пакуваат со картони со најлонски кеси завиткани внатре.


For the HDPE pipe fittings with the diameter large to 315mm, they are wrapped by PP bags for each items.


Can SUNPLAST provide HDPE pipe fittings with our logo?

Да, SUNPLAST може да обезбеди опрема за цевки HDPE со обележано лого на клиенти, кога количината на нарачката ќе достигне одредено барање.


Мала количина на нарачка може да се обезбеди само во нашата залиха, на која нема лого.


How to inquire to SUNPLAST for a quote of HDPE pipe fittings? 

 SUNPLAST is ready to provide our best quality HDPE pipe fittings to all customers around the world.

 

For 24 hours contact details as below:

Е-пошта: извоз @ sunplastpipe.com

            sunplastpipe@gmail.com

Tel: 0086-574-87226883/87467583

Mobile/whatsApp/Wechat: 0086-15968493053/18858041865 

View as  
 
HDPE Butt Fusion 90 Degree Elbow

HDPE Butt Fusion 90 Degree Elbow

Injection moulded HDPE Butt Fusion 90 Degree Elbow for HDPE pipes, available 63-800mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, STOCK AVAILBLE for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion 90 Degree Elbow!!!

Прочитај повеќеИспрати барање
HDPE Butt Fusion 45 Degree Elbow

HDPE Butt Fusion 45 Degree Elbow

Инјекциски обликуван лак за спојување на HDPE за закопчување 45 цевки за цевки од HDPE, достапен 63-800мм во SDR11 и SDR17, гарантирано со висок квалитет со 15 години, конкурентни цени на големо, ДОСТАПЕН АКТ за редовни големини, достапна навремена испорака. Контактирајте не за повеќе детали за HDPE Butt Fusion 45 Степен Лакт !!!

Прочитај повеќеИспрати барање
HDPE Butt Fusion 22.5 Degree Elbow

HDPE Butt Fusion 22.5 Degree Elbow

Injection moulded HDPE Butt Fusion 22.5 Degree Elbow for HDPE pipes, available 110-800mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, stock available for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion 22.5 Degree Elbow!!!

Прочитај повеќеИспрати барање
Приклучоци за крос-фузија на задник HDPE

Приклучоци за крос-фузија на задник HDPE

Injection moulded HDPE Butt Fusion Cross Fittings for HDPE pipes, available 63-630mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, stock available for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion Cross Fittings!!!

Прочитај повеќеИспрати барање
Фузија на задник HDPE еднаква писка

Фузија на задник HDPE еднаква писка

Injection moulded HDPE Butt Fusion Equal Tee for HDPE pipes, available 63-800mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, stock available for regular sizes, prompt delivery available. Contact us for more details of HDPE Butt Fusion Equal Tee!!!

Прочитај повеќеИспрати барање
HDPE задник фузија на крајот капа

HDPE задник фузија на крајот капа

Injection moulded HDPE butt fusion end cap for HDPE pipes, available dn75-1200mm in SDR11 & SDR17, high quality warranted with 15 years, competitive wholesale prices, stock available for regular sizes, prompt delivery available. Contact us for more details of HDPE butt fusion end cap!!!

Прочитај повеќеИспрати барање
Кина {клучен збор} Производители и добавувачи - Sunplast. Sunplast е познат со сигурен квалитет, разумна цена и најдобра услуга.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept